 |
Clean and dress interior rubber, plastic & vinyl surfaces |
 |
 |
 |
 |
| Thoroughly clean interior rubber, plastic & vinyl surfaces with a General Purpose Cleaner or Interior Cleaner by agitating the cleaning solution with a Doo All Pad ... |
... or a detail brush. Apply the solution with the cleaning tool, and do not allow it to dwell for more than two minutes or dry on the surface. |
Remove the solution from the surface by blowing the excess into a towel with compressed air, then wiping the surface thoroughly. |
 |
 |
 |
| Hand clean the tops of the door jambs (latch level up). |
Ensure all dirt is removed from the folds of the weather stripping on both the door jamb ... |
... and the door itself. |
 |
 |
 |
| Spot clean the visors and headliner by hand-applying a mild General Purpose Cleaner solution or lightly spraying an Aerosol Interior Cleaner. |
Do not saturate of over-agitate the headliner. Either can loosen the adhesive causing it to sag. |
Hand apply a Water-Based Dressing to all rubber, plastic & vinyl surfaces cleaned (except those areas that shouldn’t be slippery). |
|
|
|
|
|
|
|
|