Clean Wheels & Tires

Wet the entire body area around the wheel wells with cool water to dilute the Wheel Cleaner should it come into contact with the paint.

Ensure the wheel is cool to the touch, then test an inconspicuous area of the wheel to confirm that the Cleaner is compatible with the wheel.

Spray the Cleaner directly on the wheel. Do not allow it to dwell for longer than 30 seconds, or to dry on the surface.

If the brake dust is heavy, agitate the surface with a spoke brush. Don’t apply an acid-based Cleaner to all four wheels at the same time if agitation is necessary (the product will dwell too long on wheel surface).

Thoroughly pressure wash the wheel holding the nozzle 8” to 12” from the wheel surface.

Stand at different angles to ensure the product is completely rinsed from the surface.

Spray both the wheel and tire with a Tire Cleaner, and allow it to dwell for one minute. The alkaline Tire Cleaner will neutralize any traces of acid left from the acid-based Wheel Cleaner.

Agitate the Cleaner on the tire with a stiff bristled brush to remove embedded road film.

Thoroughly pressure rinse both the wheel and tire.

Wet the entire body area around the wheel wells with cool water to dilute the Wheel Cleaner should it come into contact with the paint.

Spray both the wheel and tire with a non-acid Wheel Cleaner, and allow it to dwell for one minute.

Agitate the wheel with a spoke brush.

Agitate the Cleaner on the tire with a stiff bristled brush to remove embedded road film.

Thoroughly pressure rinse both the wheel and tire.